Wall and Floor Lining Service
Do your walls and floors need repairs?
Your walls and floors are exposed to tough conditions – and continued exposure can cause brick, tiles and mortar to fail, allowing chemicals to seep into the concrete and earth below.
This can lead to regulatory violations, fines and most of all – expensive repairs and replacement flooring. But a fibreglass lining can prevent this happening.
Economical, durable GRP linings for all industries
We can provide safe, non-slip and chemical-resistant floor lining for any industry – including hospitals, breweries, schools, dairies, hotels, the pharmaceutical and food production industries and many others.
Best of all, a fibreglass restoration is strong, impact-resistant and will last for many years – saving you money.
Regulation compliant industrial
wall and floor linings
A Fibreglass floor lining resists bacterial growth and is fully compliant with food hygiene regulations.
Surface restorations from Sui Generis are seamless, one-piece and perfectly adhered to almost any surface. They will follow the contours of walls and drainage panels and cap and cove technology allows us to ensure a room can be made water-tight.
Our floor and wall linings can also be solvent-free but both are easy to clean – making them ideal for a wide variety of facilities.
Get your free bund survey today
We can apply your new wall or floor lining fast and with minimum disruption to your work. Call 01206 798 798 to arrange your free, no-obligation survey by our GRP Lining specialists.
Hover over animation to hold
Wall and Floor Lining Case Studies
Chester Zoo Wall and Floor Lining
GRP wall and Floor Linings create a safer environment for conservation breeding at Chester Zoo...
Testing Facility GRP Floor Lining
For a wash down area, a waterproof
GRP floor lining was required to create a fully sealed and safe area...
Roof Gutter GRP Lining
Sui Generis were called to update 900 linear metres of rooftop gutters and drainage with a GRP lining...
Leak-free fibreglass wall and floor linings from start to finish...
Surface preparation
Our operatives will assess the state of your walls and floors before getting to work. We'll then prepare the surface mechanically using dust control equipment before etching the surface or causing light abrasion if needed. This provides a key for the primer to adhere to.
A primer ensures perfect adhesion
All surfaces are dusted and primed with the appropriate primer to ensure the permanent adhesion of the resin which follows. If we encounter eroded areas, we can build them up layer by layer until they become flush with the rest of the surface if required before we begin fibreglass lining.
Reinforced with a fibreglass mat
We reinforce the resins with chopped strand fibreglass matting for extra strength.
When this is complete, we apply a penultimate coat of coloured resin. White is the most popular, but most colours are available.
Final top coat
Next, we lightly sand down the surface to remove any irregularities before applying the final top coat.
This gives the surface of your wall or floor a ceramic-like finish that is easy to clean and looks good.
5 good reasons to choose Sui Generis wall and floor linings...
- Economy – many years of useful life
- Safety – non-slip and chemical-resistant
- Quality – compliant with regulations
- Aesthetics - improve the look and surroundings
- Service – 90% repeat custom rate
Your fibreglass wall & floor linings guide
The floors and walls of your facility are easily taken for granted, but over time, wear and chemical attack can cause serious damage. This can result in chemicals easting away and mortar, brickwork and even concrete, seeping in to the earth below – and posing a serious threat to the environment.
A fibreglass wall and floor lining from Sui Generis can repair a damaged surface completely – even down to cleaning and coating the existing bricks for re-use in the new surface.
Moreover, because of the chemical-resistance of a fibreglass surface restoration, it can contain spills and leaks without suffering corrosion.
Whatever the state of your walls, you can avoid expensive repairs down the line by asking for a cost-effective fibreglass wall and floor repair.
What kinds of industries use fibreglass linings?
Fibreglass wall lining from Sui Generis can be customised to contain anything from toxic and corrosive solutions to fuel and dairy products. These are just a few of the industries we've helped with solvent-free and leak-proof wall and floor linings:
- Food production
- Breweries
- Hospitals
- Pharmaceutical
- Dairies
- Prisons
- Schools
- Hotels
- Abattoirs.
Why use fibreglass to repair a wall or floor?
Because it doesn't just repair the damaged area, it also gives the surface a long-lasting layer of protection.
When you line a surface with a fibreglass lining, you'll get a strong finish that can be slip-resistant, chemical-resistant, graffiti-resistant, UV-stable and easy to clean.
Fibreglass linings from Sui Generis are also fully compliant with food hygiene regulations – resisting the growth of mould, yeast and other micro-bacterial organisms.
A GRP restoration is cost-effective and faster to install than traditional materials. And with many years of useful life, it gives you long lasting peace of mind.
Are there other benefits to fibreglass floor linings?
Many. These are just some of the properties of GRP liners:
- Hygienic
- Solvent free
- Leak free
- Corrosion proof
- Impact resistant
Do your wall and floor restorations conform to regulations?
Yes. Our fibreglass wall lining is designed for industries where hygiene, cleanliness and slip-resistance is paramount.
It complies fully with food hygiene regulations, resists mould, yeast and bacterial growth and meets Class O BS 476 part 6, Class 1 BS 476 part 7 standards.
Can you give me advice about my walls and floors?
Of course. We'd be happy to help you repair and line your problem surfaces.
Just call us on 01206 798 798 today and we'll arrange a free, no-obligation site inspection to give you a full assessment of everything you need to get your surfaces back in perfect working order – long-term.
What our customers say about us...
We're committed to the providing the best quality products and service,
here's what our customers say about us...
Hover over area to hold. All our reviews are independently verified.
PAYMENT THROUGH:
Sui Generis: The market leader in GRP fibreglass lining
Quality guarantee
Our highly competitive work gives you the best quality results every time – every one of our operatives is highly skilled, well trained and takes exceptional pride in what they do. With Sui Generis, you can rely on effective, long-lasting work.
Compliance and accreditations
When you choose Sui Generis to undertake work on your behalf, it always complies with and exceeds the standards required by relevant legislation. We always advise you what the regulations require before we start.
Our health & safety promise
We take your safety seriously, and that of all our people, whether we're at a small factory or a nuclear plant. We always adhere to stringent health and safety procedures at every stage – and comply with your own Heath and Safety policies.
Satisfaction Assured
Every job we undertake is completed with your satisfaction in mind. We work hard to be the best at every task we tackle – and that's why over 90% of our customers return to us time after time.
Copyright © 2022 Sui Generis Ltd. | Part of The Milbank Group 
News Blog 
Twitter 
Facebook 
Instagram
LinkedIn