Moulded Fibreglass Grating
Structure
Sui Generis moulded fibreglass grating is formed using continuous interwoven glass fibres as reinforcement material and resin as the matrix with continuous solidification through a mould system. The uniform construction provides excellent bi-directional mechanical properties.
Gritted Fibreglass Grating
Gritted Grating has quartz crystal bonded to the top surface ensuring an extremely durable and slip resistant surface. This type of grating has one of the highest degrees of slip resistance measured for a walking surface.
Mini Mesh Fibreglass Grating
Mini-Mesh Grating has a 12mm x 12mm open mesh area. The smaller opening prevents objects as small as 13mm from falling through and complies with the European 15mm ball falling test requirement. The smaller holes also offer smooth movement for small wheeled trolleys, wheelchairs etc.
Smooth Fibreglass Grating
Smooth Grating has the same characteristics as other Fibreglass Grating except no anti-slip surface. These are widely used for decoration, fall protection, fences, machine guards etc.
Concave Fibreglass Grating
Concave Grating is more suited to low foot traffic areas and is particularly suitable for hygiene applications where a high standard of slip resistance is needed and ease of cleaning is a consideration.
Conductive Top Grating
Sui Generis Conductive Moulded Grating is specially formulated with a carbon black surface, eliminating hazardous static electricity when properly grounded. Available in all resin finishes, Sui Generis Conductive Gratings are primarily used in the high-tech electronic industries, munitions and arsenal manufacturing plants and other spark sensitive environments where sophisticated equipment may be damaged due to static electricity. The specialized grating has an electrical resistance of less than 26 kilo-ohms per 300mm while retaining other desirable characteristics of conventional Fibreglass Moulded Grating.
Covered Fibreglass Grating
All types and sizes of grating are available with covered tops. The covered top is typically 3mm thick and is bonded to the grating panel after manufacture. This creates a strong but lightweight covered panel. All panels are available with gritted, chequer plate or smooth finish. Ideally suited to service trenches, access pits, gully covers, walkways and cable troughs etc.
Sui Generis standard moulded panel sizes
3660 x 1220mm
Depth 25/38/50mm
3007 x 1007mm
2007 x 1007mm
Depth 25/38mm
Special sizes can be manufactured on request.
- Download PDF: Moulded Grating Specification
- Download PDF: Moulded Grating Load Deflection Table
- Download PDF: Grating Brochure
